Description
T10-XPG adsorbent is a high performance synthetic molecular sieve adsorbent developed for Air Pre-Purification Units (APPU) specifically for the removal of trace contaminants such as carbon dioxide, water, and also for the partial removal of nitrous oxide and hydrocarbons.
High Performance
Its enhanced performance compared with normal 13X type adsorbents provides the opportunity for reduced operational costs or higher air treatment throughputs. Also, the 70% higher CO2 adsorption capacity greatly improves the APPU efficiency in high ambient CO2 areas, loading quantity is greatly reduced compared with 13X and the risk of CO2 early breakthrough can be well controlled.
|
Typical physical properties (nominal)
|
|
|
4*8
|
8*12
|
|
Pore diameter (Å)
|
8
|
8
|
|
Bead diameter (mm)
|
4
|
2
|
|
Bulk density (kg/m3)
|
650
|
680
|
|
Crush strength (N)
|
≥75
|
≥25
|
|
Equilibrium CO2 capacity[1] (wt%)
|
≥6.3
|
≥6.3
|
[1] Measured at 2 mm Hg and 25 °C
Application examples
- New APPU, well proved products together with tailor-made design summaries. We assist your vertical, horizontal and radial adsorption vessel designs.
- Normal 13X adsorbents upgrade, new adsorbents configuration design provided together with products that best fit the existing vessels, energy savings guaranteed.
- Revamp projects for higher throughput, expert consultation to ensure revamp success.
- Revamp projects to eliminate N2O or hydrocarbon problems for rare gas production or safety issues.
Technical Service
Our air separation experts will fully support your technical & operational activities to ensure a safe and efficient operation.
Storage
T10-XPG picks up ambient moisture easily when drum damaged, so please keep the drums intact and far from wet atmospheres before loading.
Regeneration
T10-XPG adsorbent can be regenerated for reuse by purging at elevated temperatures.
Shipping Information
T10-XPG adsorbent is shipped in 208L steel drums, 140 kg net weight per drum.
